Miata Mailing List: May 1993, Message #67

sponsored by

[previous topic] [previous] [index] [next] [next topic]


From: (none) Subject: Re: oil pressure and gauge settings Date: (none)
garvin@cfd.mae.ncsu.edu (Michael Garvin) > After I had the calibration checked and the pressure read off the >pump I found this out. It appears to be right at 18psi at the half-way point. >The manual says that 1k warm idle pressure should be 28psi, and the deviation >was what was worrying me. Replacing the oil pump helped some; I now get better >pressure (nothing below about 18) than I was, but it still isn't what it was >before the dealer did a tune-up and oil change (ominous theme music). I've >had the good performance place check it again and they said I was getting good >lubrication and not to worry unless it dropped under 10psi. The owner said >they could shim the pump/valve if I was really concerned about the pressure, >but that he wouldn't really recommend it or do it on his own car (so I didn't). >I just keep an eye on the gauge these days and don't worry about it; with the >temps in the 80s I just enjoy the car! Perhaps when the redesigned Miatas are >brought out I'll replace mine... You might just try changing the type and weight of oil you're running. I use RedLine synthetic 20W50 in my car and it almost pegs the guage (about 80 PSI) on start-up and it *never* gets below 1/2 on the gauge. --- ___ __ ___ Alan Dahl | alan.dahl@mccaw.com -or- /_ / / / Analysts International Co. | adahl@axysdev.krkdwa.mccaw.com / / _/_ /___ 10655 N.E. 4th St. Suite 804 | (NeXTMail OK) Bellevue, WA 98004 | PH: (206) 828-1336 | FAX: (206) 828-1300

[previous topic] [previous] [index] [next] [next topic]