Miata Mailing List: February 1995, Message #80
sponsored by



     


   From: Dale Kirstein 
Subject: Re: AUTOX - Which front sway bar?
   Date: Thu, 2 Feb 1995 01:51:09 -0500



On Wed, 1 Feb 1995, Joe Murphy wrote:

> Doug Quara, On Jan 31, writes:
> 
> The camber is -2.0 back, -1.5 front. A big part of the problem was my
> driving and partly the Yokohama A008R 185/60s I had were bought used and
> slowly turning to rock. I was running 32 psi front, 30 back - which worked
> well. If I didn't adjust the rear pressures (to 30) over the course of the
> 3 runs the oversteer would be *MUCH* worse.
> 
> I now have new BFG 230 205/55s which should help. :-)

Remember that the BFGs need a lot less pressure to work right! On my car I
use about 24 front, 22 back, (stock sway bar) or 26 front if I put the
big sway bar on the front.

Happy motoring!

Dale Kirstein