Miata Mailing List: March 1996, Message #14
sponsored by



     


   From: 
Subject: re:Drilled rotors
   Date: Fri, 1 Mar 1996 09:18:34 -0500

I obtained a set of drilled rotors out of a Canadian company.  Don't have 
their address handy, but I found their ad in the back of Road and Track or Car 
and Driver magazine (small ad; had to search for it).  Cost was in the 
neighborhood of $235 for a set of four.  Deivery time was about 7-10 days.  
The company will also drill your stock rotors for about $30 each plus S&H.  
I've put approximately 14K miles on them with no problems (I've inspected them 
twice).  As a side note, I put these rotors on my Miata with 100K miles.  The 
stock front rotors had used 50% of the allowable wear, the rear rotors about 
10% of allowable wear.

The BirdMeister
91 Silver A with Bell Turbo