Miata Mailing List: September 1998, Message #152

sponsored by

From:	"Will Brown" <wbrown@miata.net>
Subject:	Re: Hard Dog's Night (Long)
Date:	Wed, 2 Sep 1998 04:33:55 +0000


On  1 Sep 98 at 23:54, LeanAngle1@aol.com <LeanAngle1@aol.com> wrote:

> On one bar I installed, everything lined up perfectly except the
> rear main spars would not fit flush to the rear frame deck. they
> were about 1/2" above the deck. I loosened the seat belt tower main
> hoop bolts so that the bar would have room to flex a little, then
> put a 4" long carriage bolt through each (one on each spar) spar
> mounting holes. I tightened the carriage bolts and then the flange
> fit flush to the deck. 

So was it the rollbar, or the Miata that bent to conform to the 
other?

And thank you for taking the time to compose such a lengthy reply!!

___________________________________________________
\/\/    ---->    Will Brown    ---->    '96M in Charlottesville VA USA

MiataPower Site -> http://www.mindspring.com/~wbrownmx5/power
My Miata Site   -> http://www.mindspring.com/~wbrownmx5/miata.htm