Miata Mailing List: November 1999, Message #958

sponsored by

[previous topic] [previous] [index]       [next topic]


From: Paul Williamson <williamp@bit-net.com>
Subject:Re: Removing radio on 99 miata
Date: Mon, 8 Nov 1999 17:53:05 -0500


At 11/7/99 11:37 PM , Ken Devivo wrote:
>I wonder if anyone has removed the radio on a 99 miata.  All of the web
>sites I have read on this topic seem to be referring to models prior to
>my 99.  For instance, removing the vents does not seem to be necessary
>since they are part of a separate dash panel.

Radio removal does not require removing the dash.  From the 99 Workshop Manual

1. Disconnect the neg battery cable.

2. Remove the service hole covers by inserting a small tape-wrapped 
flathead screwdriver into the slot and carefully pry them off without 
scratching the center panel. Pry up and pull off the service hole covers 
carefully to prevent the posts from breaking off.

3. With the beveled parts of the SST (Removing tool 49 UN01 050) facing 
inward, insert them into the unit.

4. Pull the SST outward and forward to slide out the unit.

5. Disconnect the connectors and antenna jack.

For radio, amp, and/or dash removal, I suggest you get a copy of the manual 
and read the appropriate sections.  The pictures will be a big help.


Paul (mailto:williamp@bit-net.com)
Never drive any faster than your guardian angel can fly.
homepage:  http://www.bit-net.com/~williamp/



[previous topic] [previous] [index]       [next topic]