Miata Mailing List: December 1999, Message #218

sponsored by

Hi Patrick,

I have power windows in my '91.  You may have a different handle and no 
armrest if yours is a later model year.  The following is from the Haynes 
Miata Repair Manual. 

"1) Pry the trim cap from the upper armrest screw, then remove the screws and 
armrest.
2) Remove the screw from the inside door handle cover.
3) Lift up the inside door handle and remove the trim cover.
4) Insert a putty knife or thin screwdriver between the door trim panel and 
door to disengage the door trim retaining clips.  Work around the outer edge 
until the panel is loose.
5) Make sure all the door trim retaining clips are disengaged.  Remove the 
door trim panel from the vehicle by gently pulling it upwards and out, while 
disconnecting any electrical connectors."  Mine had none.
6) The speaker cover can be removed in the same way, by disengaging it's 
retaining clips.

Put it back together in just the opposite way...drop it into place, press in 
the clips until you hear them click, and re-attach the handle cover and 
armrest.

I hope this helps.  It really is simple.

I removed my panels to install my own armrest/handles to fit my tastes.  You 
can see them at:
http://members.xoom.com/atiam/armrests2.html

Good luck,

Mitch Frey 
Ol' Silver 91 B
Team Ambient, oddball mods
http://members.xoom.com/atiam/mitchmiata2.html